New Toyo Key Pro OBD II Support Toyota 40/80/128 BIT (4D, 4D-G, 4D-H) All Key Lost
New Toyo Key Pro OBD II Support Toyota 40/80/128 BIT (4D, 4D-G, 4D-H) All Key Lost
1, This TOYO KEY PRO OBD II Can work independently.
2, Be suitable for 40/80/128 BIT (4D, 4D-G, 4D-H)
3, Use this device can match 2 master keys and 1 spare key.
offer top quality New Toyo Key Pro OBD II Support Toyota 40/80/128 BIT (4D, 4D-G, 4D-H) All Key Lost
Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3
images of New Toyo Key Pro OBD II Support Toyota 40/80/128 BIT (4D, 4D-G, 4D-H) All Key Lost
Top 4 Reasons to Get TOYO KEY PRO OBD II:
- This TOYO KEY PRO OBD II can work independently, it's plug-and-play.
- Be suitable for 40/80/128 BIT (4D, 4D-G, 4D-H)
- Use this device can match 2 master keys and 1 valet key
- TOYO KEY PRO(COBD25025) Vs TOYO KEY TJECU(COBD24824):
TOYO KEY PRO can work alone, it is plug-and-play.
TOYO KEY TJECU is supposed to work with cn900mini/ND900 mini
TOYO KEY PRO OBD II Operating Steps:
- Insert the key into the ignition lock.
- Plug the TOYO KEY Pro OBD-II adapter into the car.
- When you hear the beeps for the first time, pull out the key and insert the key again.
- When you hear the beeps again, it means the first key is matched successful. Meanwhile the immobilizer light is on and the car enters the matching mode.
- Pull out the first key , then insert the keys which need to be matched one by one.
- If the immobilizer light goes out, that means all work done and you can start the car.
- If the immobilizer light is on all the time, use any key on-off it for 5 times to finish matching.
Note: Be suitable for 40/80/128 BIT (4D, 4D-G, 4D-H)
Use this device can match 2 master keys and 1 valet key.
Package Includes:
1pc x NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT (4D, 4D-G, 4D-H) All Key lost
Go to Buy: New Toyo Key Pro OBD II Support Toyota 40/80/128 BIT (4D, 4D-G, 4D-H) All Key Lost