2023 KT200 ECU Programmer Basic Version Read Write ECU&TCU Support OBD/BOOT/BDM/JTAG Modes Multiple Protocols
2023 KT200 ECU Programmer Basic Version Read Write ECU&TCU Support OBD/BOOT/BDM/JTAG Modes Multiple Protocols
The New KT200 is mainly used to read and write ECU and TCU. The product is mainly designed for refit shop, repair shop, auto electronics repair merchant.
offer top quality 2023 KT200 ECU Programmer Basic Version Read Write ECU&TCU Support OBD/BOOT/BDM/JTAG Modes Multiple Protocols
Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3
images of 2023 KT200 ECU Programmer Basic Version Read Write ECU&TCU Support OBD/BOOT/BDM/JTAG Modes Multiple Protocols
New KT200 ECU Programmer Master Version Read Write ECU&TCU Support OBD/BOOT/BDM/JTAG Modes Multiple Protocols
The New KT200 is mainly used to read and write ECU and TCU. The product is mainly designed for refit shop, repair shop, auto electronics repair merchant.
Product Features:
More protocols, more comprehensive & wide coverage, full-featured version of the device, all open protocols.
The reading and writing speed is more stable and faster than the old KT200.
Support multi-language.
Support cars, trucks, motorcycles, boats, tractors, gearboxes, medc17 clones.
With automatic verification function, online technical support, online internet work
Support Bosch, Denso, Continental, Hitachi, Delphi and other series of ecu.
Product Functions:
New KT200 support OBD, BENCH, Jtag, Boot, BDMmodes.
1: OBD mode：(read the data from Diagnostic port, you need remove the ecu or tcu from car or open the ecu box, just read everything from car, we also support obd reading, we supply original file from our server, you can read it via obd reading. )
2: BENCH mode: we also call it service mode, you can use this mode clone or backup all ecu data, read the internal flash and external flash and eeprom data, so you can save a lot of money for clone ecu and tcu , you also can clone tcu and chiptuning with this mode.
3: Jtag mode: open the ecu, and wire it or use ours adapter to connect ecu ways,some of denso ecu always need use this mode for reading and writing .
4: Boot mode: open the ecu and always can backup everything, read the flash and eeprom, you can save some ecu cause your obd write failed, or some
5: BDM mode: some of the ecu need read and write in bdm mode, open the ecu and use ours adapter to connect it.
Notice:
1. Full license activated. Works online only.
2. It runs via KTSuite Manager program. Software requires activation before use.
Compatible operating systems:
Windows 7 /8/8.1 /10/11 pro/ultimate , CPU > 2.5 GHz (Intel i5, i7), RAM > 8GB
Instructions for using KTsuit:
Do following work before starting our tools
A:Connect your KTsuit with USB cable to laptop
B:laptop or PC must connect to internet
Step1: go to www.ktmtool.com website donwload the software,install the package.
Step2:Check the SN where tie on your box backside , noticy : dont realase that SN to anyone , its a safe code for you ,dont let any third party or guys know that code or it easy let your tools lock.
Step3:Send that SN to email :info@ktmtool.com for active and link your tool to your email .(you tool will be lock if you dont send to active)
Step4：run the ktsuit manager, and register it with your email , then input the sn active your account, don’t close the ktsuitmanager before your run ktsuit ,always keep click the active button before you run the ktsuit software.
Step5: input that SN code to you login windows when you run KTsuit main software, it will ask you input that code ,then you software and tool will be online.
Package Includes:
1pc x Master,
1pc x BENCH box,
2pcs x OBD wires,
1pc x pinout line,
1pc x plastic box
4pcs x BOM adapters,
3pcs x Transfer cables,
4pcs x Power wire,
1pc x Set of resistors,
4pcs x Adapter plugs,
5pcs x Power adapters