GODIAG GT107 DSG Gearbox Data Read/Write Adapter Plus Kess V2 V5.017 SW V2.8 Red PCB Plus Ktag 7.020 V2.25 SW Red PCB EU Online Version
GODIAG GT107 DSG Gearbox Data Read/Write Adapter Plus Kess V2 V5.017 SW V2.8 Red PCB Plus Ktag 7.020 V2.25 SW Red PCB EU Online Version
The package includes GODIAG GT107 DSG Gearbox Data Read/Write Adapter, Kess V2 V5.017 SW V2.8 Red PCB Plus Ktag 7.020 V2.25 SW Red PCB EU Online Version.
offer top quality GODIAG GT107 DSG Gearbox Data Read/Write Adapter Plus Kess V2 V5.017 SW V2.8 Red PCB Plus Ktag 7.020 V2.25 SW Red PCB EU Online Version
Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3
images of GODIAG GT107 DSG Gearbox Data Read/Write Adapter Plus Kess V2 V5.017 SW V2.8 Red PCB Plus Ktag 7.020 V2.25 SW Red PCB EU Online Version
This package includes the following items:
GT107 DSG Gearbox Data Read/Write Adapter with GT105
KESS V2 V5.017 SW V2.8 Red PCB Plus KTAG 7.020 SW V2.25 Red PCB EU Online Version
GT107 DSG Gearbox Data Read/Write Adapter with GT105 Adapter
GODIAG GT107 is a DSG gearbox connection adapter. DSG Gearbox maintenance engineers can clone, diagnose and repair DSG Gearbox ECU and can also read, write and adjust data or power for DSG Gearbox ECU via PCMFlash, PCMTuner, and KESSv2, etc.
GODIAG GT107 DSG Gearbox Data Adapter Support the Connection of:
Renault DC0/DC4 Gen2
Honda LUK UDCT
DQ200 (0AM) [WR/CK]
DQ250C (02E) [RD/WR/CK]
DQ250E/F (02E) [WR/CK]
DQ200MQB/G2 (0CW) [WR/CK]
DQ250MQB (0D9) [WR/CK]
VL300/V30 (01J/0AN) [WR/CK]
VL381 (0AW) [WR/CK]
DL501/G2 (0B5) [WR/CK]
DQ500 (0BH/0BT) [RD/WR/CK] reading when using a direct connection.
DQ200/MQB/G2 Boot (MICRO) [RD/WR/CK]
DQ200/MQB/G2 Boot (EEPROM) [RD/WR]
DQ250E/F/MQB Boot (MICRO) [RD/WR/CK]
DQ250E/F/MQB Boot (EEPROM) [RD/WR]
VL300/V30 BSL (FLASH) [RD/WR/CK]
VL300/V30 BSL (EEPROM) [RD/WR/CK]
VL381 Boot (MICRO) [RD/WR/CK]
VL381 Boot (EEPROM) [RD/WR]
DL501/G2 Boot (MICRO) [RD/WR/CK]
DL501/G2 Boot (EEPROM) [RD/WR]
Kess V2 V5.017 Red PCB Online Version V2.8 Plus KTAG 7.020 V2.25 Red PCB EURO Online Version
Notice: It's recommended to install Kess V2 and KTAG software on seperate laptops.
Kess V2 V5.017 Feature:
1. Software Version: V2.80, Firmware Version: V5.017, Free Update Online
2. 100% No Tokens Need for All Vehicles: no tokens reset button, you can use Kess V5.017 for lifetime
3. Cover all major brands and protocols including Line, KAN, EDC17 and MED17 and for Ford J1850.
4. Support cars/trucks/tractors/bikes! KESS V2 supports vehicles accroding to engine. So V5.017 KESS V2 can support new vehicles!
5. Read and write ECU via OBD2 port directly, no need to disassemble ECU from the car, easy to use.
6. Kess V2 Newest Software: Ksuite V2.8 which is is very easy to install, just follow the tips to click "Next Step", then it will work fine!
7. Multi-language available: English, German, Spanish, Italian, Portuguese, French.
8. Works on Win XP Win7 32bit Win 10 etc.
9. Kess 5.017 With NEW K-Suite 2.8 with exactly 7400 Vehicles added.
10. With Free Wilos, Map, DTC Remover, DPF 2017 etc in Software (take V2.70 as example)
K-Tag Ktag 7.020 Red PCB EURO Online Version No Token Limited
K-TAG KTAG 7.020 Master Instructions :
Model name: KTAG Master
Software Version: V2.25 (Newest)
Fireware Version: V7.020
Update: By link
Car Models:For CAR,TRUCK,MOTORCYCLE,TRACTORS,boats,heavy duty,no year limited
Languages: English/ German/ Spanish/ Italian/ Portuguese/ French
Functions: Ecu Programming Tool
Connection: By BDM
Support Protocol: Jtag, BDM and Boot protocols (tricore and ST10)
Used with KESSV2 DQ200, DQ250, DQ500:
Steps:
1. Connect Godiag GT107 to gearbox ECU DQ250, DQ200, DQ500.
2. Connect the Godiag ECU IMMO Prog AD with the vehicle battery or 12v 3A power supply. (The Godiag ECU IMMO Prog AD’s IMMO button must be up.)
3. Connect kessv2 device, and press down the GT107 switch and it will be in “Manual” ignition mode.
4. Press down the 120 ohm resistor switch.
5. Connect the computer and open the software to read and write data.
Work BOOT: use a direct connection to the connector of the control UNIT, the switching power supply is carried out either manually (recommended) or by using the scheme of automatic power control, GODIAG GT107 DSG gearbox data adapter (same PowerBox or converted from KESS). In case of manual control, the entrance to the boot mode may not happen on the first attempt.
Read DQ500: only when connected directly!
NOTE: the power supply must be switched manually, while only the ignition must be switched on or off (pin 15), the second contact must be connected constantly.
Package List:
1set x Godiag GT107 with GT105 Adapter
1set x Kess V2
1set x Ktag