Newest Activation Tool for Mercedes/Benz NTG5 S1 NTG5S1 Support Apple CarPlay and Android Auto

Activate by OBD2 Plug and Play, Easy to use.
Support Apple Carplay and Androidauto.(android auto only support car firmware version from 2016.9)

images of Newest Activation Tool for Mercedes/Benz NTG5 S1 NTG5S1 Support Apple CarPlay and Android Auto

Newest Activation Tool for Mercedes/Benz NTG5 S1 NTG5S1 Support Apple CarPlay and Android Auto

Features:

1. Activate by OBD2 Plug and Play, Easy to use.

2. Connect mobile phone with car only via cable.

3. Support Apple Carplay and Androidauto.(Android auto only support car firmware version from 2016.9)

4. Original Protocol Communication , not effect dealer warranty.

5. For Mercedes NTG5.1 via OBD2

NTG5S1 (A/B/CLA/GLA/GLE/CLS Series)

Plug & Play! Just need insert to obd port than active 1 minute to work!

Unlimited use!

Compatible models(COMAND NTG5s1):

A-Class W176 Date of manufacture from 01.2016 to 12.2017

B-Class W246 Date of manufacture from 01.2016 to 12.2017

E-Class W213 Date of manufacturefrom 01.2016 to 12.2017

CLA-Class W117 Date of manufacture from 01.2016 to 12.2017

GLA-Class W156 Date of manufacture from 01.2016 to 12.2017

GLE-Class W166 Date of manufacture 01.2016 to 12.2017

GLE Coupe W292 Date of manufacture 01.2016 to 12.2017

GLE-Class X166 Date of manufacture 01.2016 to 12.2017

CLS-Class W218 Date of manufacture 01.2016 to 12.2017

C/GLC/S Series NTG5.0 and NTG5E are not support! (Need to use video interface and iponoe box to achieve.)

(If your headunit is old version, the function will not normal work or can not be opened, you need update your hedunit to latest version online)

Please don't insert this OBD tool for unsupported models, or you need take all consequences. Many Thanks.

Notice:

1. Must ensure that the siri option of your iphone is keep opening status.

2. Must use original charging cable of your iphone .

3. Carplay is an app of Apple's IOS system, only iphone can use the Carplay app.(Ip5 or Ip5 above are support)

4. Android Auto is an app of the Android system, Android phone can use the Android Auto app.(But not all Android phone support Android Auto)

Steps:

1.Turn on the car ignition switch

2.NTG5 S1 device connected to the car OBD interface

3.Car display "DIAG" words, 10 seconds after the host restart

4.Remove the OBD NTG5 S1 device. And then connect the phone (preferably using the original charging cable)

5.End debugging,all is ok